Export limit exceeded: 16992 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16992 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-71223 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix refcount leak in smb2_open() When ksmbd_vfs_getattr() fails, the reference count of ksmbd_file must be released. | ||||
| CVE-2026-23202 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer The curr_xfer field is read by the IRQ handler without holding the lock to check if a transfer is in progress. When clearing curr_xfer in the combined sequence transfer loop, protect it with the spinlock to prevent a race with the interrupt handler. Protect the curr_xfer clearing at the exit path of tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race with the interrupt handler that reads this field. Without this protection, the IRQ handler could read a partially updated curr_xfer value, leading to NULL pointer dereference or use-after-free. | ||||
| CVE-2026-23196 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer Add DMA buffer readiness check before reading DMA buffer to avoid unexpected NULL pointer accessing. | ||||
| CVE-2026-23177 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm, shmem: prevent infinite loop on truncate race When truncating a large swap entry, shmem_free_swap() returns 0 when the entry's index doesn't match the given index due to lookup alignment. The failure fallback path checks if the entry crosses the end border and aborts when it happens, so truncate won't erase an unexpected entry or range. But one scenario was ignored. When `index` points to the middle of a large swap entry, and the large swap entry doesn't go across the end border, find_get_entries() will return that large swap entry as the first item in the batch with `indices[0]` equal to `index`. The entry's base index will be smaller than `indices[0]`, so shmem_free_swap() will fail and return 0 due to the "base < index" check. The code will then call shmem_confirm_swap(), get the order, check if it crosses the END boundary (which it doesn't), and retry with the same index. The next iteration will find the same entry again at the same index with same indices, leading to an infinite loop. Fix this by retrying with a round-down index, and abort if the index is smaller than the truncate range. | ||||
| CVE-2026-23189 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix NULL pointer dereference in ceph_mds_auth_match() The CephFS kernel client has regression starting from 6.18-rc1. We have issue in ceph_mds_auth_match() if fs_name == NULL: const char fs_name = mdsc->fsc->mount_options->mds_namespace; ... if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) { / fsname mismatch, try next one */ return 0; } Patrick Donnelly suggested that: In summary, we should definitely start decoding `fs_name` from the MDSMap and do strict authorizations checks against it. Note that the `-o mds_namespace=foo` should only be used for selecting the file system to mount and nothing else. It's possible no mds_namespace is specified but the kernel will mount the only file system that exists which may have name "foo". This patch reworks ceph_mdsmap_decode() and namespace_equals() with the goal of supporting the suggested concept. Now struct ceph_mdsmap contains m_fs_name field that receives copy of extracted FS name by ceph_extract_encoded_string(). For the case of "old" CephFS file systems, it is used "cephfs" name. [ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(), get rid of a series of strlen() calls in ceph_namespace_match(), drop changes to namespace_equals() body to avoid treating empty mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap() as namespace_equals() isn't an equivalent substitution there ] | ||||
| CVE-2026-23203 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this change triggered the following call trace on my BeagleBone Black board: WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496 RTNL: assertion failed at net/8021q/vlan_core.c (236) Modules linked in: CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT Hardware name: Generic AM33XX (Flattened Device Tree) Call trace: unwind_backtrace from show_stack+0x28/0x2c show_stack from dump_stack_lvl+0x30/0x38 dump_stack_lvl from __warn+0xb8/0x11c __warn from warn_slowpath_fmt+0x130/0x194 warn_slowpath_fmt from vlan_for_each+0x120/0x124 vlan_for_each from cpsw_add_mc_addr+0x54/0xd8 cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec __hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88 __dev_mc_add from igmp6_group_added+0x84/0xec igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0 __ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4 __ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168 do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8 ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c do_sock_setsockopt from __sys_setsockopt+0x84/0xac __sys_setsockopt from ret_fast_syscall+0x0/0x5 This trace occurs because vlan_for_each() is called within cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held. Since modifying vlan_for_each() to operate without the RTNL lock is not straightforward, and because ndo_set_rx_mode() is invoked both with and without the RTNL lock across different code paths, simply adding rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution. To resolve this issue, we opt to execute the actual processing within a work queue, following the approach used by the icssg-prueth driver. | ||||
| CVE-2026-23207 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Protect curr_xfer check in IRQ handler Now that all other accesses to curr_xfer are done under the lock, protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the spinlock. Without this protection, the following race can occur: CPU0 (ISR thread) CPU1 (timeout path) ---------------- ------------------- if (!tqspi->curr_xfer) // sees non-NULL spin_lock() tqspi->curr_xfer = NULL spin_unlock() handle_*_xfer() spin_lock() t = tqspi->curr_xfer // NULL! ... t->len ... // NULL dereference! With this patch, all curr_xfer accesses are now properly synchronized. Although all accesses to curr_xfer are done under the lock, in tegra_qspi_isr_thread() it checks for NULL, releases the lock and reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer(). There is a potential for an update in between, which could cause a NULL pointer dereference. To handle this, add a NULL check inside the handlers after acquiring the lock. This ensures that if the timeout path has already cleared curr_xfer, the handler will safely return without dereferencing the NULL pointer. | ||||
| CVE-2026-23181 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: sync read disk super and set block size When the user performs a btrfs mount, the block device is not set correctly. The user sets the block size of the block device to 0x4000 by executing the BLKBSZSET command. Since the block size change also changes the mapping->flags value, this further affects the result of the mapping_min_folio_order() calculation. Let's analyze the following two scenarios: Scenario 1: Without executing the BLKBSZSET command, the block size is 0x1000, and mapping_min_folio_order() returns 0; Scenario 2: After executing the BLKBSZSET command, the block size is 0x4000, and mapping_min_folio_order() returns 2. do_read_cache_folio() allocates a folio before the BLKBSZSET command is executed. This results in the allocated folio having an order value of 0. Later, after BLKBSZSET is executed, the block size increases to 0x4000, and the mapping_min_folio_order() calculation result becomes 2. This leads to two undesirable consequences: 1. filemap_add_folio() triggers a VM_BUG_ON_FOLIO(folio_order(folio) < mapping_min_folio_order(mapping)) assertion. 2. The syzbot report [1] shows a null pointer dereference in create_empty_buffers() due to a buffer head allocation failure. Synchronization should be established based on the inode between the BLKBSZSET command and read cache page to prevent inconsistencies in block size or mapping flags before and after folio allocation. [1] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:create_empty_buffers+0x4d/0x480 fs/buffer.c:1694 Call Trace: folio_create_buffers+0x109/0x150 fs/buffer.c:1802 block_read_full_folio+0x14c/0x850 fs/buffer.c:2403 filemap_read_folio+0xc8/0x2a0 mm/filemap.c:2496 do_read_cache_folio+0x266/0x5c0 mm/filemap.c:4096 do_read_cache_page mm/filemap.c:4162 [inline] read_cache_page_gfp+0x29/0x120 mm/filemap.c:4195 btrfs_read_disk_super+0x192/0x500 fs/btrfs/volumes.c:1367 | ||||
| CVE-2026-23198 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Don't clobber irqfd routing type when deassigning irqfd When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86 and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to handle a concurrent routing update, verify that the irqfd is still active before consuming the routing information. As evidenced by the x86 and arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below), clobbering the entry type without notifying arch code is surprising and error prone. As a bonus, checking that the irqfd is active provides a convenient location for documenting _why_ KVM must not consume the routing entry for an irqfd that is in the process of being deassigned: once the irqfd is deleted from the list (which happens *before* the eventfd is detached), it will no longer receive updates via kvm_irq_routing_update(), and so KVM could deliver an event using stale routing information (relative to KVM_SET_GSI_ROUTING returning to userspace). As an even better bonus, explicitly checking for the irqfd being active fixes a similar bug to the one the clobbering is trying to prevent: if an irqfd is deactivated, and then its routing is changed, kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing() (because the irqfd isn't in the list). And so if the irqfd is in bypass mode, IRQs will continue to be posted using the old routing information. As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type results in KVM incorrectly keeping the IRQ in bypass mode, which is especially problematic on AMD as KVM tracks IRQs that are being posted to a vCPU in a list whose lifetime is tied to the irqfd. Without the help of KASAN to detect use-after-free, the most common sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to the memory for irqfd structure being re-allocated and zeroed, resulting in irqfd->irq_bypass_data being NULL when read by avic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: <TASK> avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b </TASK> ---[ end trace 0000000000000000 ]--- If AVIC is inhibited when the irfd is deassigned, the bug will manifest as list corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: <TASK> avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa ---truncated--- | ||||
| CVE-2026-23186 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (acpi_power_meter) Fix deadlocks related to acpi_power_meter_notify() The acpi_power_meter driver's .notify() callback function, acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock that is also acquired by callbacks in sysfs attributes of the device being unregistered which is prone to deadlocks between sysfs access and device removal. Address this by moving the hwmon device removal in acpi_power_meter_notify() outside the lock in question, but notice that doing it alone is not sufficient because two concurrent METER_NOTIFY_CONFIG notifications may be attempting to remove the same device at the same time. To prevent that from happening, add a new lock serializing the execution of the switch () statement in acpi_power_meter_notify(). For simplicity, it is a static mutex which should not be a problem from the performance perspective. The new lock also allows the hwmon_device_register_with_info() in acpi_power_meter_notify() to be called outside the inner lock because it prevents the other notifications handled by that function from manipulating the "resource" object while the hwmon device based on it is being registered. The sending of ACPI netlink messages from acpi_power_meter_notify() is serialized by the new lock too which generally helps to ensure that the order of handling firmware notifications is the same as the order of sending netlink messages related to them. In addition, notice that hwmon_device_register_with_info() may fail in which case resource->hwmon_dev will become an error pointer, so add checks to avoid attempting to unregister the hwmon device pointer to by it in that case to acpi_power_meter_notify() and acpi_power_meter_remove(). | ||||
| CVE-2025-71221 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue() Add proper locking in mmp_pdma_residue() to prevent use-after-free when accessing descriptor list and descriptor contents. The race occurs when multiple threads call tx_status() while the tasklet on another CPU is freeing completed descriptors: CPU 0 CPU 1 ----- ----- mmp_pdma_tx_status() mmp_pdma_residue() -> NO LOCK held list_for_each_entry(sw, ..) DMA interrupt dma_do_tasklet() -> spin_lock(&desc_lock) list_move(sw->node, ...) spin_unlock(&desc_lock) | dma_pool_free(sw) <- FREED! -> access sw->desc <- UAF! This issue can be reproduced when running dmatest on the same channel with multiple threads (threads_per_chan > 1). Fix by protecting the chain_running list iteration and descriptor access with the chan->desc_lock spinlock. | ||||
| CVE-2026-23197 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: preserve error state in block data length handler When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX, the length handler sets the state to IMX_I2C_STATE_FAILED. However, i2c_imx_master_isr() unconditionally overwrites this with IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns buffers and crashes the system. Guard the state transition to preserve error states set by the length handler. | ||||
| CVE-2026-23184 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_netlink_report() Oneway transactions sent to frozen targets via binder_proc_transaction() return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated as successful since the target is expected to thaw at some point. It is then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors as the transaction could have been consumed by the now thawed target. This is the case for binder_netlink_report() which derreferences 't' after a pending frozen error, as pointed out by the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8 Read of size 8 at addr ffff00000f98ba38 by task binder-util/522 CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_netlink_report.isra.0+0x694/0x6c8 binder_transaction+0x66e4/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Allocated by task 522: __kmalloc_cache_noprof+0x17c/0x50c binder_transaction+0x584/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Freed by task 488: kfree+0x1d0/0x420 binder_free_transaction+0x150/0x234 binder_thread_read+0x2d08/0x3ce4 binder_ioctl+0x488/0x2940 [...] ================================================================== Instead, make a transaction copy so the data can be safely accessed by binder_netlink_report() after a pending frozen error. While here, add a comment about not using t->buffer in binder_netlink_report(). | ||||
| CVE-2026-23180 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: add bounds check for if_id in IRQ handler The IRQ handler extracts if_id from the upper 16 bits of the hardware status register and uses it to index into ethsw->ports[] without validation. Since if_id can be any 16-bit value (0-65535) but the ports array is only allocated with sw_attr.num_ifs elements, this can lead to an out-of-bounds read potentially. Add a bounds check before accessing the array, consistent with the existing validation in dpaa2_switch_rx(). | ||||
| CVE-2026-23187 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domains Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove(). | ||||
| CVE-2026-23191 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix racy access at PCM trigger The PCM trigger callback of aloop driver tries to check the PCM state and stop the stream of the tied substream in the corresponding cable. Since both check and stop operations are performed outside the cable lock, this may result in UAF when a program attempts to trigger frequently while opening/closing the tied stream, as spotted by fuzzers. For addressing the UAF, this patch changes two things: - It covers the most of code in loopback_check_format() with cable->lock spinlock, and add the proper NULL checks. This avoids already some racy accesses. - In addition, now we try to check the state of the capture PCM stream that may be stopped in this function, which was the major pain point leading to UAF. | ||||
| CVE-2026-23200 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6 route. [0] Commit f72514b3c569 ("ipv6: clear RA flags when adding a static route") introduced logic to clear RTF_ADDRCONF from existing routes when a static route with the same nexthop is added. However, this causes a problem when the existing route has a gateway. When RTF_ADDRCONF is cleared from a route that has a gateway, that route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns true. The issue is that this route was never added to the fib6_siblings list. This leads to a mismatch between the following counts: - The sibling count computed by iterating fib6_next chain, which includes the newly ECMP-eligible route - The actual siblings in fib6_siblings list, which does not include that route When a subsequent ECMP route is added, fib6_add_rt2node() hits BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the counts don't match. Fix this by only clearing RTF_ADDRCONF when the existing route does not have a gateway. Routes without a gateway cannot qualify for ECMP anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing RTF_ADDRCONF on them is safe and matches the original intent of the commit. [0]: kernel BUG at net/ipv6/ip6_fib.c:1217! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217 [...] Call Trace: <TASK> fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532 __ip6_ins_rt net/ipv6/route.c:1351 [inline] ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946 ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571 inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577 sock_do_ioctl+0xdc/0x300 net/socket.c:1245 sock_ioctl+0x576/0x790 net/socket.c:1366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-23192 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: linkwatch: use __dev_put() in callers to prevent UAF After linkwatch_do_dev() calls __dev_put() to release the linkwatch reference, the device refcount may drop to 1. At this point, netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an empty list and returns without blocking), wait for the refcount to become 1 via netdev_wait_allrefs_any(), and then free the device via kobject_put(). This creates a use-after-free when __linkwatch_run_queue() tries to call netdev_unlock_ops() on the already-freed device. Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in netdev_run_todo() before kobject_put() would not work, because netdev_lock_ops() is conditional - it only locks when netdev_need_ops_lock() returns true. If the device doesn't require ops_lock, linkwatch won't hold any lock, and netdev_run_todo() acquiring the lock won't provide synchronization. Fix this by moving __dev_put() from linkwatch_do_dev() to its callers. The device reference logically pairs with de-listing the device, so it's reasonable for the caller that did the de-listing to release it. This allows placing __dev_put() after all device accesses are complete, preventing UAF. The bug can be reproduced by adding mdelay(2000) after linkwatch_do_dev() in __linkwatch_run_queue(), then running: ip tuntap add mode tun name tun_test ip link set tun_test up ip link set tun_test carrier off ip link set tun_test carrier on sleep 0.5 ip tuntap del mode tun name tun_test KASAN report: ================================================================== BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline] BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123 CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events_unbound linkwatch_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x156/0x4c9 mm/kasan/report.c:482 kasan_report+0xdf/0x1a0 mm/kasan/report.c:595 netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] netdev_unlock_ops include/net/netdev_lock.h:47 [inline] __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304 process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x5da/0xe40 kernel/workqueue.c:3421 kthread+0x3b3/0x730 kernel/kthread.c:463 ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> ================================================================== | ||||
| CVE-2026-23182 | 1 Linux | 1 Linux Kernel | 2026-02-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: tegra: Fix a memory leak in tegra_slink_probe() In tegra_slink_probe(), when platform_get_irq() fails, it directly returns from the function with an error code, which causes a memory leak. Replace it with a goto label to ensure proper cleanup. | ||||
| CVE-2026-23205 | 1 Linux | 1 Linux Kernel | 2026-02-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix memory leak in smb2_open_file() Reproducer: 1. server: directories are exported read-only 2. client: mount -t cifs //${server_ip}/export /mnt 3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct 4. client: umount /mnt 5. client: sleep 1 6. client: modprobe -r cifs The error message is as follows: ============================================================================= BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown() ----------------------------------------------------------------------------- Object 0x00000000d47521be @offset=14336 ... WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577 ... Call Trace: <TASK> kmem_cache_destroy+0x94/0x190 cifs_destroy_request_bufs+0x3e/0x50 [cifs] cleanup_module+0x4e/0x540 [cifs] __se_sys_delete_module+0x278/0x400 __x64_sys_delete_module+0x5f/0x70 x64_sys_call+0x2299/0x2ff0 do_syscall_64+0x89/0x350 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs] WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577 | ||||