Export limit exceeded: 29857 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29857 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38010 | 1 Linux | 1 Linux Kernel | 2025-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking The current implementation uses bias_pad_enable as a reference count to manage the shared bias pad for all UTMI PHYs. However, during system suspension with connected USB devices, multiple power-down requests for the UTMI pad result in a mismatch in the reference count, which in turn produces warnings such as: [ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763103] Call trace: [ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30 [ 237.763110] phy_power_off+0x48/0x100 [ 237.763113] tegra_xusb_enter_elpg+0x204/0x500 [ 237.763119] tegra_xusb_suspend+0x48/0x140 [ 237.763122] platform_pm_suspend+0x2c/0xb0 [ 237.763125] dpm_run_callback.isra.0+0x20/0xa0 [ 237.763127] __device_suspend+0x118/0x330 [ 237.763129] dpm_suspend+0x10c/0x1f0 [ 237.763130] dpm_suspend_start+0x88/0xb0 [ 237.763132] suspend_devices_and_enter+0x120/0x500 [ 237.763135] pm_suspend+0x1ec/0x270 The root cause was traced back to the dynamic power-down changes introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"), where the UTMI pad was being powered down without verifying its current state. This unbalanced behavior led to discrepancies in the reference count. To rectify this issue, this patch replaces the single reference counter with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask corresponds to one of the four USB2 PHYs, allowing us to track each pad's enablement status individually. With this change: - The bias pad is powered on only when the mask is clear. - Each UTMI pad is powered on or down based on its corresponding bit in the mask, preventing redundant operations. - The overall power state of the shared bias pad is maintained correctly during suspend/resume cycles. The mutex used to prevent race conditions during UTMI pad enable/disable operations has been moved from the tegra186_utmi_bias_pad_power_on/off functions to the parent functions tegra186_utmi_pad_power_on/down. This change ensures that there are no race conditions when updating the bitmask. | ||||
| CVE-2025-37836 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix reference leak in pci_register_host_bridge() If device_register() fails, call put_device() to give up the reference to avoid a memory leak, per the comment at device_register(). Found by code review. [bhelgaas: squash Dan Carpenter's double free fix from https://lore.kernel.org/r/db806a6c-a91b-4e5a-a84b-6b7e01bdac85@stanley.mountain] | ||||
| CVE-2022-49958 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix netdevice reference leaks in attach_default_qdiscs() In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails to attach qdisc because there is no memory in attach_one_default_qdisc(). Then dev->qdisc will be noop_qdisc by default. But the other queues may be able to successfully attach to default qdisc. In this case, the fallback to noqueue process will be triggered. If the original attached qdisc is not released and a new one is directly attached, this will cause netdevice reference leaks. The following is the bug log: veth0: default qdisc (fq_codel) fail, fallback to noqueue unregister_netdevice: waiting for veth0 to become free. Usage count = 32 leaked reference. qdisc_alloc+0x12e/0x210 qdisc_create_dflt+0x62/0x140 attach_one_default_qdisc.constprop.41+0x44/0x70 dev_activate+0x128/0x290 __dev_open+0x12a/0x190 __dev_change_flags+0x1a2/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x332/0x1150 __rtnl_newlink+0x52f/0x8e0 rtnl_newlink+0x43/0x70 rtnetlink_rcv_msg+0x140/0x3b0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1bb/0x290 netlink_sendmsg+0x37c/0x4e0 sock_sendmsg+0x5f/0x70 ____sys_sendmsg+0x208/0x280 Fix this bug by clearing any non-noop qdiscs that may have been assigned before trying to re-attach. | ||||
| CVE-2022-50007 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix refcount leak in __xfrm_policy_check() The issue happens on an error path in __xfrm_policy_check(). When the fetching process of the object `pols[1]` fails, the function simply returns 0, forgetting to decrement the reference count of `pols[0]`, which is incremented earlier by either xfrm_sk_policy_lookup() or xfrm_policy_lookup(). This may result in memory leaks. Fix it by decreasing the reference count of `pols[0]` in that path. | ||||
| CVE-2025-22074 | 1 Linux | 1 Linux Kernel | 2025-11-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix r_count dec/increment mismatch r_count is only increased when there is an oplock break wait, so r_count inc/decrement are not paired. This can cause r_count to become negative, which can lead to a problem where the ksmbd thread does not terminate. | ||||
| CVE-2022-50019 | 1 Linux | 1 Linux Kernel | 2025-11-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: Fix refcount leak bug in ucc_uart.c In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. | ||||
| CVE-2022-50038 | 1 Linux | 1 Linux Kernel | 2025-11-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/meson: Fix refcount bugs in meson_vpu_has_available_connectors() In this function, there are two refcount leak bugs: (1) when breaking out of for_each_endpoint_of_node(), we need call the of_node_put() for the 'ep'; (2) we should call of_node_put() for the reference returned by of_graph_get_remote_port() when it is not used anymore. | ||||
| CVE-2022-50033 | 1 Linux | 1 Linux Kernel | 2025-11-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: ohci-ppc-of: Fix refcount leak bug In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. | ||||
| CVE-2022-50043 | 1 Linux | 1 Linux Kernel | 2025-11-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fix potential refcount leak in ndisc_router_discovery() The issue happens on specific paths in the function. After both the object `rt` and `neigh` are grabbed successfully, when `lifetime` is nonzero but the metric needs change, the function just deletes the route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh` again if above conditions hold. The function simply overwrite `neigh` if succeeds or returns if fails, without decreasing the reference count of previous `neigh`. This may result in memory leaks. Fix it by decrementing the reference count of `neigh` in place. | ||||
| CVE-2022-50059 | 1 Linux | 1 Linux Kernel | 2025-11-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: don't leak snap_rwsem in handle_cap_grant When handle_cap_grant is called on an IMPORT op, then the snap_rwsem is held and the function is expected to release it before returning. It currently fails to do that in all cases which could lead to a deadlock. | ||||
| CVE-2022-50061 | 1 Linux | 1 Linux Kernel | 2025-11-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: nomadik: Fix refcount leak in nmk_pinctrl_dt_subnode_to_map of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak." | ||||
| CVE-2024-10763 | 1 Apuswp | 1 Campress | 2025-11-13 | 9.8 Critical |
| The Campress theme for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.35 via the 'campress_woocommerce_get_ajax_products' function. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where php file type can be uploaded and included. | ||||
| CVE-2022-26318 | 1 Watchguard | 1 Fireware | 2025-11-13 | 9.8 Critical |
| On WatchGuard Firebox and XTM appliances, an unauthenticated user can execute arbitrary code, aka FBX-22786. This vulnerability impacts Fireware OS before 12.7.2_U2, 12.x before 12.1.3_U8, and 12.2.x through 12.5.x before 12.5.9_U2. | ||||
| CVE-2023-53073 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/core: Always clear status for idx The variable 'status' (which contains the unhandled overflow bits) is not being properly masked in some cases, displaying the following warning: WARNING: CPU: 156 PID: 475601 at arch/x86/events/amd/core.c:972 amd_pmu_v2_handle_irq+0x216/0x270 This seems to be happening because the loop is being continued before the status bit being unset, in case x86_perf_event_set_period() returns 0. This is also causing an inconsistency because the "handled" counter is incremented, but the status bit is not cleaned. Move the bit cleaning together above, together when the "handled" counter is incremented. | ||||
| CVE-2025-27919 | 1 Anydesk | 1 Anydesk | 2025-11-12 | 8.2 High |
| An issue was discovered in AnyDesk through 9.0.4. A remotely connected user with the "Control my device" permission can manipulate remote AnyDesk settings and create a password for the Full Access profile without needing confirmation from the counterparty. Consequently, the attacker can later connect without this counterparty confirmation. | ||||
| CVE-2023-53118 | 1 Linux | 1 Linux Kernel | 2025-11-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix a procfs host directory removal regression scsi_proc_hostdir_rm() decreases a reference counter and hence must only be called once per host that is removed. This change does not require a scsi_add_host_with_dma() change since scsi_add_host_with_dma() will return 0 (success) if scsi_proc_host_add() is called. | ||||
| CVE-2020-26919 | 1 Netgear | 2 Jgs516pe, Jgs516pe Firmware | 2025-11-07 | 9.8 Critical |
| NETGEAR JGS516PE devices before 2.6.0.43 are affected by lack of access control at the function level. | ||||
| CVE-2020-11651 | 5 Canonical, Debian, Opensuse and 2 more | 5 Ubuntu Linux, Debian Linux, Leap and 2 more | 2025-11-07 | 9.8 Critical |
| An issue was discovered in SaltStack Salt before 2019.2.4 and 3000 before 3000.2. The salt-master process ClearFuncs class does not properly validate method calls. This allows a remote user to access some methods without authentication. These methods can be used to retrieve user tokens from the salt master and/or run arbitrary commands on salt minions. | ||||
| CVE-2021-35394 | 1 Realtek | 1 Rtl819x Jungle Software Development Kit | 2025-11-07 | 9.8 Critical |
| Realtek Jungle SDK version v2.x up to v3.4.14B provides a diagnostic tool called 'MP Daemon' that is usually compiled as 'UDPServer' binary. The binary is affected by multiple memory corruption vulnerabilities and an arbitrary command injection vulnerability that can be exploited by remote unauthenticated attackers. | ||||
| CVE-2021-35395 | 1 Realtek | 1 Rtl819x Jungle Software Development Kit | 2025-11-07 | 9.8 Critical |
| Realtek Jungle SDK version v2.x up to v3.4.14B provides an HTTP web server exposing a management interface that can be used to configure the access point. Two versions of this management interface exists: one based on Go-Ahead named webs and another based on Boa named boa. Both of them are affected by these vulnerabilities. Specifically, these binaries are vulnerable to the following issues: - stack buffer overflow in formRebootCheck due to unsafe copy of submit-url parameter - stack buffer overflow in formWsc due to unsafe copy of submit-url parameter - stack buffer overflow in formWlanMultipleAP due to unsafe copy of submit-url parameter - stack buffer overflow in formWlSiteSurvey due to unsafe copy of ifname parameter - stack buffer overflow in formStaticDHCP due to unsafe copy of hostname parameter - stack buffer overflow in formWsc due to unsafe copy of 'peerPin' parameter - arbitrary command execution in formSysCmd via the sysCmd parameter - arbitrary command injection in formWsc via the 'peerPin' parameter Exploitability of identified issues will differ based on what the end vendor/manufacturer did with the Realtek SDK webserver. Some vendors use it as-is, others add their own authentication implementation, some kept all the features from the server, some remove some of them, some inserted their own set of features. However, given that Realtek SDK implementation is full of insecure calls and that developers tends to re-use those examples in their custom code, any binary based on Realtek SDK webserver will probably contains its own set of issues on top of the Realtek ones (if kept). Successful exploitation of these issues allows remote attackers to gain arbitrary code execution on the device. | ||||