| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Reachable Assertion vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS).
When the device receives a specific BGP UPDATE packet, the rpd crashes and restarts. Continuous receipt of this specific packet will cause a sustained DoS condition.
For the issue to occur, BGP multipath with "pause-computation-during-churn" must be configured on the device, and the attacker must send the paths via a BGP UPDATE from a established BGP peer.
This issue affects:
Junos OS:
* All versions before 21.4R3-S7,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S5,
* from 23.2 before 23.2R2,
* from 23.4 before 23.4R2.
Junos OS Evolved:
* All versions before 21.4R3-S7-EVO,
* from 22.3 before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-S5-EVO,
* from 23.2 before 23.2R2-EVO,
* from 23.4 before 23.4R2-EVO. |
| A Reachable Assertion vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).On all Junos OS and Junos OS Evolved devices, when route validation is enabled, a rare condition during BGP initial session establishment can lead to an rpd crash and restart. This occurs specifically when the connection request fails during error-handling scenario.
Continued session establishment failures leads to a sustained DoS condition.
This issue affects Junos OS:
* All versions before 22.2R3-S6,
* from 22.4 before 22.4R3-S6,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S4,
* from 24.2 before 24.2R2;
Junos OS Evolved:
* All versions before 22.2R3-S6-EVO,
* from 22.4 before 22.4R3-S6-EVO,
* from 23.2 before 23.2R2-S3-EVO,
* from 23.4 before 23.4R2-S4-EVO,
* from 24.2 before 24.2R2-EVO. |
| A Protection Mechanism Failure vulnerability in kernel filter processing of Juniper Networks Junos OS allows an attacker sending IPv6 traffic destined to the device to effectively bypass any firewall filtering configured on the interface.
Due to an issue with Junos OS kernel filter processing, the 'payload-protocol' match is not being supported, causing any term containing it to accept all packets without taking any other action. In essence, these firewall filter terms were being processed as an 'accept' for all traffic on the interface destined for the control plane, even when used in combination with other match criteria.
This issue only affects firewall filters protecting the device's control plane. Transit firewall filtering is unaffected by this vulnerability.
This issue affects Junos OS:
* all versions before 21.2R3-S9,
* from 21.4 before 21.4R3-S11,
* from 22.2 before 22.2R3-S7,
* from 22.4 before 22.4R3-S7,
* from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S1,
* from 24.4 before 24.4R1-S2, 24.4R2.
This is a more complete fix for previously published CVE-2024-21607 (JSA75748). |
| The Free Booking Plugin for Hotels, Restaurants and Car Rentals – eaSYNC Booking plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.3.21 via the 'view_request_details' due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to view the details of any booking request. The vulnerability was partially patched in versions 1.3.18 and 1.3.21. |
| An Exposure of Resource to Wrong Sphere vulnerability in the sampling service of Juniper Networks Junos OS Evolved allows an unauthenticated network-based attacker to send arbitrary data to the device, which leads msvcsd process to crash with limited availability impacting Denial of Service (DoS) and allows unauthorized network access to the device, potentially impacting system integrity.
This issue only happens when inline jflow is configured.
This does not impact any forwarding traffic. The impacted services MSVCS-DB app crashes momentarily and recovers by itself.
This issue affects Juniper Networks Junos OS Evolved:
* 21.4 versions earlier than 21.4R3-S7-EVO;
* 22.2 versions earlier than 22.2R3-S3-EVO;
* 22.3 versions earlier than 22.3R3-S2-EVO;
* 22.4 versions earlier than 22.4R3-EVO;
* 23.2 versions earlier than 23.2R1-S2-EVO, 23.2R2-EVO. |
| An Incorrect Comparison vulnerability in the local address verification API of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker to create sessions or send traffic to the device using the network and broadcast address of the subnet assigned to an interface. This is unintended and unexpected behavior and can allow an attacker to bypass certain compensating controls, such as stateless firewall filters.
This issue affects Junos OS Evolved:
* All versions before 21.4R3-S8-EVO,
* 22.2-EVO before 22.2R3-S4-EVO,
* 22.3-EVO before 22.3R3-S4-EVO,
* 22.4-EVO before 22.4R3-S3-EVO,
* 23.2-EVO before 23.2R2-S1-EVO,
* 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO. |
| Distribution is a toolkit to pack, ship, store, and deliver container content. Systems running registry versions 3.0.0-beta.1 through 3.0.0-rc.2 with token authentication enabled may be vulnerable to an issue in which token authentication allows an attacker to inject an untrusted signing key in a JSON web token (JWT). The issue lies in how the JSON web key (JWK) verification is performed. When a JWT contains a JWK header without a certificate chain, the code only checks if the KeyID (`kid`) matches one of the trusted keys, but doesn't verify that the actual key material matches. A fix for the issue is available at commit 5ea9aa028db65ca5665f6af2c20ecf9dc34e5fcd and expected to be a part of version 3.0.0-rc.3. There is no way to work around this issue without patching if the system requires token authentication. |
| The Membership Plugin – Restrict Content plugin for WordPress is vulnerable to Missing Authentication in all versions up to, and including, 3.2.16 via the 'rcp_stripe_create_setup_intent_for_saved_card' function due to missing capability check. Additionally, the plugin does not check a user-controlled key, which makes it possible for unauthenticated attackers to leak Stripe SetupIntent client_secret values for any membership. |
| A misconfiguration flaw was found in Keycloak. This issue can allow an attacker to redirect users to an arbitrary URL if a 'Valid Redirect URI' is set to http://localhost or http://127.0.0.1, enabling sensitive information such as authorization codes to be exposed to the attacker, potentially leading to session hijacking. |
| An open redirect vulnerability was found in Keycloak. A specially crafted URL can be constructed where the referrer and referrer_uri parameters are made to trick a user to visit a malicious webpage. A trusted URL can trick users and automation into believing that the URL is safe, when, in fact, it redirects to a malicious server. This issue can result in a victim inadvertently trusting the destination of the redirect, potentially leading to a successful phishing attack or other types of attacks.
Once a crafted URL is made, it can be sent to a Keycloak admin via email for example. This will trigger this vulnerability when the user visits the page and clicks the link. A malicious actor can use this to target users they know are Keycloak admins for further attacks. It may also be possible to bypass other domain-related security checks, such as supplying this as a OAuth redirect uri. The malicious actor can further obfuscate the redirect_uri using URL encoding, to hide the text of the actual malicious website domain. |
| An Incorrect Calculation vulnerability in the Layer 2 Control
Protocol
Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage.
When the issue is seen, the following log message will be generated:
op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP,
This issue affects Junos OS Evolved:
* all versions before 21.4R3-S7-EVO,
* from 22.2 before 22.2R3-S4-EVO,
* from 22.3 before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-S2-EVO,
* from 23.2 before 23.2R2-S1-EVO,
* from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO. |
| An Improper Isolation or Compartmentalization vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on QFX5000 Series and EX Series allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
If a specific malformed LACP packet is received by a QFX5000 Series, or an EX4400, EX4100 or EX4650 Series device, an LACP flap will occur resulting in traffic loss.
This issue affects Junos OS on QFX5000 Series, and on EX4400, EX4100 or EX4650 Series:
* 20.4 versions from
20.4R3-S4
before 20.4R3-S8,
* 21.2 versions from
21.2R3-S2
before 21.2R3-S6,
* 21.4 versions from
21.4R2
before 21.4R3-S4,
* 22.1 versions from
22.1R2
before 22.1R3-S3,
* 22.2 versions before 22.2R3-S1,
* 22.3 versions before 22.3R2-S2, 22.3R3,
* 22.4 versions before 22.4R2-S1, 22.4R3. |
| Improper validation of a login parameter may allow attackers to redirect users to malicious websites after authentication. This can lead to various risk including stealing credentials from unsuspecting users. |
| OPEXUS FOIAXpress Public Access Link (PAL) version v11.1.0 allows attackers to bypass account-lockout and CAPTCHA protections. Unauthenticated remote attackers can more easily brute force passwords. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
If a malicious fuzzer overwrites the ext4 superblock while it is
mounted such that the s_first_data_block is set to a very large
number, the calculation of the block group can underflow, and trigger
a BUG_ON check. Change this to be an ext4_warning so that we don't
crash the kernel. |
| A static password reset token in the password reset function of DDSN Interactive Acora CMS v10.7.1 allows attackers to arbitrarily reset the user password and execute a full account takeover via a replay attack. |
| An Improper Neutralization of Data within XPath Expressions ('XPath Injection') vulnerability in J-Web shipped with Juniper Networks Junos OS allows an unauthenticated, network-based attacker to execute remote commands on the target device.
While an administrator is logged into a J-Web session or has previously logged in and subsequently logged out of their J-Web session, the attacker can arbitrarily execute commands on the target device with the other user's credentials. In the worst case, the attacker will have full control over the device.
This issue affects Junos OS:
* All versions before 21.2R3-S8,
* from 21.4 before 21.4R3-S7,
* from 22.2 before 22.2R3-S4,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S2,
* from 23.2 before 23.2R2,
* from 23.4 before 23.4R1-S1, 23.4R2. |
| Sony BRAVIA Digital Signage 1.7.8 contains an insecure direct object reference vulnerability that allows attackers to bypass authorization controls. Attackers can access hidden system resources like '/#/content-creation' by manipulating client-side access restrictions. |
| Incorrect access control in the /member/orderList API of xmall v1.1 allows attackers to arbitrarily access other users' order details via manipulation of the query parameter userId. |
