| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the Udisks daemon, where it allows unprivileged users to create loop devices using the D-BUS system. This is achieved via the loop device handler, which handles requests sent through the D-BUS interface. As two of the parameters of this handle, it receives the file descriptor list and index specifying the file where the loop device should be backed. The function itself validates the index value to ensure it isn't bigger than the maximum value allowed. However, it fails to validate the lower bound, allowing the index parameter to be a negative value. Under these circumstances, an attacker can cause the UDisks daemon to crash or perform a local privilege escalation by gaining access to files owned by privileged users. |
| Memory Corruption when a corrupted ELF image with an oversized file size is read into a buffer without authentication. |
| CHOCO TEI WATCHER mini (IB-MCT001) contains an issue with improper restriction of rendered UI layers or frames. If a user clicks on content on a malicious web page while logged into the product, unintended operations may be performed on the product. |
| An input neutralization vulnerability in the Webhook Template component of Crafty Controller allows a remote, authenticated attacker to perform remote code execution via Server Side Template Injection. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.6 before 18.4.6, 18.5 before 18.5.4, and 18.6 before 18.6.2 that could have allowed an authenticated user to, under certain conditions, render content in dialogs to other users by injecting malicious HTML content into merge request titles. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: do not index invalid pin_assignments
A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: Fix not validating setsockopt user input
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
vgic_v2_parse_attr() is responsible for finding the vCPU that matches
the user-provided CPUID, which (of course) may not be valid. If the ID
is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled
gracefully.
Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id()
actually returns something and fail the ioctl if not. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: avoid off-by-one read from userspace
We try to access count + 1 byte from userspace with memdup_user(buffer,
count + 1). However, the userspace only provides buffer of count bytes and
only these count bytes are verified to be okay to access. To ensure the
copied buffer is NUL terminated, we use memdup_user_nul instead. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: check offset alignment in binder_get_object()
Commit 6d98eb95b450 ("binder: avoid potential data leakage when copying
txn") introduced changes to how binder objects are copied. In doing so,
it unintentionally removed an offset alignment check done through calls
to binder_alloc_copy_from_buffer() -> check_buffer().
These calls were replaced in binder_get_object() with copy_from_user(),
so now an explicit offset alignment check is needed here. This avoids
later complications when unwinding the objects gets harder.
It is worth noting this check existed prior to commit 7a67a39320df
("binder: add function to copy binder object from buffer"), likely
removed due to redundancy at the time. |
| Improper Validation of Specified Index, Position, or Offset in Input (CWE-1285) in Filebeat Syslog parser and the Libbeat Dissect processor can allow a user to trigger a Buffer Overflow (CAPEC-100) and cause a denial of service (panic/crash) of the Filebeat process via either a malformed Syslog message or a malicious tokenizer pattern in the Dissect configuration. |
| An SSTI (Server-Side Template Injection) vulnerability exists in the get_dunning_letter_text method of Frappe ERPNext through 15.89.0. The function renders attacker-controlled Jinja2 templates (body_text) using frappe.render_template() with a user-supplied context (doc). Although Frappe uses a custom SandboxedEnvironment, several dangerous globals such as frappe.db.sql are still available in the execution context via get_safe_globals(). An authenticated attacker with access to configure Dunning Type and its child table Dunning Letter Text can inject arbitrary Jinja expressions, resulting in server-side code execution within a restricted but still unsafe context. This can leak database information. |
| An SSTI (Server-Side Template Injection) vulnerability exists in the get_contract_template method of Frappe ERPNext through 15.89.0. The function renders attacker-controlled Jinja2 templates (contract_terms) using frappe.render_template() with a user-supplied context (doc). Although Frappe uses a custom SandboxedEnvironment, several dangerous globals such as frappe.db.sql are still available in the execution context via get_safe_globals(). An authenticated attacker with access to create or modify a Contract Template can inject arbitrary Jinja expressions into the contract_terms field, resulting in server-side code execution within a restricted but still unsafe context. This vulnerability can be used to leak database information. |
| An SSTI (Server-Side Template Injection) vulnerability exists in the get_terms_and_conditions method of Frappe ERPNext through 15.89.0. The function renders attacker-controlled Jinja2 templates (terms) using frappe.render_template() with a user-supplied context (doc). Although Frappe uses a custom SandboxedEnvironment, several dangerous globals such as frappe.db.sql are still available in the execution context via get_safe_globals(). An authenticated attacker with access to create or modify a Terms and Conditions document can inject arbitrary Jinja expressions into the terms field, resulting in server-side code execution within a restricted but still unsafe context. This vulnerability can be used to leak database information. |
| Out-of-bounds read (CWE-125) allows an unauthenticated remote attacker to perform a buffer overflow (CAPEC-100) via the NFS protocol dissector, leading to a denial-of-service (DoS) through a reliable process crash when handling truncated XDR-encoded RPC messages. |
| A heap-based buffer overflow vulnerability exists in the PDF parsing of Foxit PDF Reader when processing specially crafted JBIG2 data. An integer overflow in the calculation of the image buffer size may occur, potentially allowing a remote attacker to execute arbitrary code. |
| A memory corruption vulnerability exists in the 3D annotation handling of Foxit PDF Reader due to insufficient bounds checking when parsing PRC data. When opening a PDF file containing malformed or specially crafted PRC content, out-of-bounds memory access may occur, resulting in memory corruption. |
| A memory corruption vulnerability exists in the 3D annotation handling of Foxit PDF Reader due to insufficient bounds checking when parsing U3D data. When opening a PDF file containing malformed or specially crafted PRC content, out-of-bounds memory access may occur, resulting in memory corruption. |
| A memory corruption vulnerability exists in the 3D annotation handling of Foxit PDF Reader due to insufficient bounds checking when parsing PRC data. When opening a PDF file containing malformed or specially crafted PRC content, out-of-bounds memory access may occur, resulting in memory corruption. |
