| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
The frequency table arrays are supposed to be terminated with an
empty element. Add such entry to the end of the arrays where it
is missing in order to avoid possible out-of-bound access when
the table is traversed by functions like qcom_find_freq() or
qcom_find_freq_floor().
Only compile tested. |
| In the Linux kernel, the following vulnerability has been resolved:
md: Don't ignore suspended array in md_check_recovery()
mddev_suspend() never stop sync_thread, hence it doesn't make sense to
ignore suspended array in md_check_recovery(), which might cause
sync_thread can't be unregistered.
After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:
1) suspend the array:
raid_postsuspend
mddev_suspend
2) stop the array:
raid_dtr
md_stop
__md_stop_writes
stop_sync_thread
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread_directly(mddev->sync_thread);
wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
3) sync thread done:
md_do_sync
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
4) daemon thread can't unregister sync thread:
md_check_recovery
if (mddev->suspended)
return; -> return directly
md_read_sync_thread
clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang;
This problem is not just related to dm-raid, fix it by ignoring
suspended array in md_check_recovery(). And follow up patches will
improve dm-raid better to frozen sync thread during suspend. |
| In the Linux kernel, the following vulnerability has been resolved:
md: Don't suspend the array for interrupted reshape
md_start_sync() will suspend the array if there are spares that can be
added or removed from conf, however, if reshape is still in progress,
this won't happen at all or data will be corrupted(remove_and_add_spares
won't be called from md_choose_sync_action for reshape), hence there is
no need to suspend the array if reshape is not done yet.
Meanwhile, there is a potential deadlock for raid456:
1) reshape is interrupted;
2) set one of the disk WantReplacement, and add a new disk to the array,
however, recovery won't start until the reshape is finished;
3) then issue an IO across reshpae position, this IO will wait for
reshape to make progress;
4) continue to reshape, then md_start_sync() found there is a spare disk
that can be added to conf, mddev_suspend() is called;
Step 4 and step 3 is waiting for each other, deadlock triggered. Noted
this problem is found by code review, and it's not reporduced yet.
Fix this porblem by don't suspend the array for interrupted reshape,
this is safe because conf won't be changed until reshape is done. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr
[Why]
There is a potential memory access violation while
iterating through array of dcn35 clks.
[How]
Limit iteration per array size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration
Fix possible out-of-bound access in ieee80211_get_rate_duration routine
as reported by the following UBSAN report:
UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47
index 15 is out of range for type 'u16 [12]'
CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic
Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017
Workqueue: mt76 mt76u_tx_status_data [mt76_usb]
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x43
__ubsan_handle_out_of_bounds.cold+0x42/0x47
ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211]
? ieee80211_tx_status_ext+0x32e/0x640 [mac80211]
ieee80211_calc_rx_airtime+0xda/0x120 [mac80211]
ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211]
mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib]
mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib]
mt76u_tx_status_data+0x67/0xd0 [mt76_usb]
process_one_work+0x225/0x400
worker_thread+0x50/0x3e0
? process_one_work+0x400/0x400
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nci: Bounds check struct nfc_target arrays
While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported:
memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18)
This appears to be a legitimate lack of bounds checking in
nci_add_new_protocol(). Add the missing checks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs
The hns3 driver define an array of string to show the coalesce
info, but if the kernel adds a new mode or a new state,
out-of-bounds access may occur when coalesce info is read via
debugfs, this patch fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Avoid reading beyond LUT array
When the floor LUT index (drm_fixp2int(lut_index) is the last
index of the array the ceil LUT index will point to an entry
beyond the array. Make sure we guard against it and use the
value of the floor LUT index.
v3:
- Drop bits from commit description that didn't contribute
anything of value |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix oob in ntfs_listxattr
The length of name cannot exceed the space occupied by ea. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries/memhp: Fix access beyond end of drmem array
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix locking for Tx timestamp tracking flush
Commit 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush")
added a lock around the Tx timestamp tracker flow which is used to
cleanup any left over SKBs and prepare for device removal.
This lock is problematic because it is being held around a call to
ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY
write command to firmware. This could lead to a deadlock if the mutex
actually sleeps, and causes the following warning on a kernel with
preemption debugging enabled:
[ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573
[ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod
[ 715.435652] INFO: lockdep is turned off.
[ 715.439591] Preemption disabled at:
[ 715.439594] [<0000000000000000>] 0x0
[ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c
[ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020
[ 715.468483] Call Trace:
[ 715.470940] dump_stack_lvl+0x6a/0x9a
[ 715.474613] ___might_sleep.cold+0x224/0x26a
[ 715.478895] __mutex_lock+0xb3/0x1440
[ 715.482569] ? stack_depot_save+0x378/0x500
[ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.494979] ? kfree+0xc1/0x520
[ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0
[ 715.502837] ? kasan_set_free_info+0x20/0x30
[ 715.507110] ? __kasan_slab_free+0x10b/0x140
[ 715.511385] ? slab_free_freelist_hook+0xc7/0x220
[ 715.516092] ? kfree+0xc1/0x520
[ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.535133] ? pci_device_remove+0xab/0x1d0
[ 715.539318] ? __device_release_driver+0x35b/0x690
[ 715.544110] ? driver_detach+0x214/0x2f0
[ 715.548035] ? bus_remove_driver+0x11d/0x2f0
[ 715.552309] ? pci_unregister_driver+0x26/0x250
[ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0
[ 715.570554] ? do_syscall_64+0x3b/0x90
[ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 715.579529] ? start_flush_work+0x542/0x8f0
[ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.599960] ? wait_for_completion_io+0x250/0x250
[ 715.604662] ? lock_acquire+0x196/0x200
[ 715.608504] ? do_raw_spin_trylock+0xa5/0x160
[ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0
[ 715.633550] ? trace_hardirqs_on+0x1c/0x130
[ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.646220] ? do_raw_spin_trylock+0xa5/0x160
[ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73
[ 715.696005] pci_device_remove+0xab/0x1d0
[ 715.700018] __device_release_driver+0x35b/0x690
[ 715.704637] driver_detach+0x214/0x2f0
[ 715.708389] bus_remove_driver+0x11d/0x2f0
[ 715.712489] pci_unregister_driver+0x26/0x250
[ 71
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7921: fix possible AOOB issue in mt7921_mcu_tx_rate_report
Fix possible array out of bound access in mt7921_mcu_tx_rate_report.
Remove unnecessary varibable in mt7921_mcu_tx_rate_report |
| In the Linux kernel, the following vulnerability has been resolved:
rtw88: Fix array overrun in rtw_get_tx_power_params()
Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the
following array overrun is logged:
================================================================================
UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34
index 5 is out of range for type 'u8 [5]'
CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651
Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014
Workqueue: phy0 ieee80211_scan_work [mac80211]
Call Trace:
dump_stack+0x64/0x7c
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds.cold+0x43/0x48
rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core]
? rtw_pci_read16+0x20/0x20 [rtw_pci]
? check_hw_ready+0x50/0x90 [rtw_core]
rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core]
rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core]
rtw_set_channel+0xab/0x110 [rtw_core]
rtw_ops_config+0x87/0xc0 [rtw_core]
ieee80211_hw_config+0x9d/0x130 [mac80211]
ieee80211_scan_state_set_channel+0x81/0x170 [mac80211]
ieee80211_scan_work+0x19f/0x2a0 [mac80211]
process_one_work+0x1dd/0x3a0
worker_thread+0x49/0x330
? rescuer_thread+0x3a0/0x3a0
kthread+0x134/0x150
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x30
================================================================================
The statement where an array is being overrun is shown in the following snippet:
if (rate <= DESC_RATE11M)
tx_power = pwr_idx_2g->cck_base[group];
else
====> tx_power = pwr_idx_2g->bw40_base[group];
The associated arrays are defined in main.h as follows:
struct rtw_2g_txpwr_idx {
u8 cck_base[6];
u8 bw40_base[5];
struct rtw_2g_1s_pwr_idx_diff ht_1s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_2s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_3s_diff;
struct rtw_2g_ns_pwr_idx_diff ht_4s_diff;
};
The problem arises because the value of group is 5 for channel 14. The trivial
increase in the dimension of bw40_base fails as this struct must match the layout of
efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set
the group for channel 14 to 4 if rate <= DESC_RATE11M.
This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines") |
| In the Linux kernel, the following vulnerability has been resolved:
kyber: fix out of bounds access when preempted
__blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and
passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx
for the current CPU again and uses that to get the corresponding Kyber
context in the passed hctx. However, the thread may be preempted between
the two calls to blk_mq_get_ctx(), and the ctx returned the second time
may no longer correspond to the passed hctx. This "works" accidentally
most of the time, but it can cause us to read garbage if the second ctx
came from an hctx with more ctx's than the first one (i.e., if
ctx->index_hw[hctx->type] > hctx->nr_ctx).
This manifested as this UBSAN array index out of bounds error reported
by Jakub:
UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9
index 13106 is out of range for type 'long unsigned int [128]'
Call Trace:
dump_stack+0xa4/0xe5
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds.cold.13+0x2a/0x34
queued_spin_lock_slowpath+0x476/0x480
do_raw_spin_lock+0x1c2/0x1d0
kyber_bio_merge+0x112/0x180
blk_mq_submit_bio+0x1f5/0x1100
submit_bio_noacct+0x7b0/0x870
submit_bio+0xc2/0x3a0
btrfs_map_bio+0x4f0/0x9d0
btrfs_submit_data_bio+0x24e/0x310
submit_one_bio+0x7f/0xb0
submit_extent_page+0xc4/0x440
__extent_writepage_io+0x2b8/0x5e0
__extent_writepage+0x28d/0x6e0
extent_write_cache_pages+0x4d7/0x7a0
extent_writepages+0xa2/0x110
do_writepages+0x8f/0x180
__writeback_single_inode+0x99/0x7f0
writeback_sb_inodes+0x34e/0x790
__writeback_inodes_wb+0x9e/0x120
wb_writeback+0x4d2/0x660
wb_workfn+0x64d/0xa10
process_one_work+0x53a/0xa80
worker_thread+0x69/0x5b0
kthread+0x20b/0x240
ret_from_fork+0x1f/0x30
Only Kyber uses the hctx, so fix it by passing the request_queue to
->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can
map the queues itself to avoid the mismatch. |
| An issue in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) when an empty array is processed with oneflow.dot. |
| An issue in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) when index as a negative number exceeds the range of size. |
| A code execution vulnerability exists in the Nef polygon-parsing functionality of CGAL libcgal CGAL-5.1.1. An oob read vulnerability exists in Nef_2/PM_io_parser.h PM_io_parser::read_vertex() Face_of[] OOB read. An attacker can provide malicious input to trigger this vulnerability. |
| A code execution vulnerability exists in the Nef polygon-parsing functionality of CGAL libcgal CGAL-5.1.1. An oob read vulnerability exists in Nef_S2/SNC_io_parser.h SNC_io_parser::read_sloop() slh->twin() An attacker can provide malicious input to trigger this vulnerability. |
