| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds Write, Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in tildearrow furnace (extern/zlib modules). This vulnerability is associated with program files inflate.C. |
| Multiple Buffer Overflows in Admin UI of EZCast Pro II version 1.17478.146 allow attackers to cause a program crash and potential remote code execution |
| Memory corruption while copying packets received from unix clients. |
| Memory corruption while passing pages to DSP with an unaligned starting address. |
| Memory corruption when copying overlapping buffers during memory operations due to incorrect offset calculations. |
| DD-WRT version 45723 contains a buffer overflow vulnerability in the UPNP network discovery service that allows remote attackers to potentially execute arbitrary code. Attackers can send crafted M-SEARCH packets with oversized UUID payloads to trigger buffer overflow conditions on the target device. |
| ArduinoCore-avr contains the source code and configuration files of the Arduino AVR Boards platform. A vulnerability in versions prior to 1.8.7 allows an attacker to trigger a stack-based buffer overflow when converting floating-point values to strings with high precision. By passing very large `decimalPlaces` values to the affected String constructors or concat methods, the `dtostrf` function writes beyond fixed-size stack buffers, causing memory corruption and denial of service. Under specific conditions, this could enable arbitrary code execution on AVR-based Arduino boards.
### Patches
- The Fix is included starting from the `1.8.7` release available from the following link [ArduinoCore-avr v1.8.7](https://github.com/arduino/ArduinoCore-avr)
- The Fixing Commit is available at the following link [1a6a417f89c8901dad646efce74ae9d3ddebfd59](https://github.com/arduino/ArduinoCore-avr/pull/613/commits/1a6a417f89c8901dad646efce74ae9d3ddebfd59)
### References
- [ASEC-26-001 ArduinoCore-avr vXXXX Resolves Buffer Overflow Vulnerability](https://support.arduino.cc/hc/en-us/articles/XXXXX)
### Credits
- Maxime Rossi Bellom and Ramtine Tofighi Shirazi from SecMate (https://secmate.dev/) |
| uev (aka libuev) before 2.4.1 has a buffer overflow in epoll_wait if maxevents is a large number. |
| A Buffer Copy without Checking Size of Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows an unauthenticated, adjacent attacker to send specific RPKI-RTR packets resulting in a crash, creating a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
This issue affects
Junos OS:
* All versions before 21.2R3-S8,
* from 21.4 before 21.4R3-S8,
* from 22.2 before 22.2R3-S4,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S2,
* from 23.2 before 23.2R2-S1,
* from 23.4 before 23.4R2.
Junos OS Evolved: * All versions before 21.2R3-S8-EVO,
* from 21.4 before 21.4R3-S8-EVO,
* from 22.2 before 22.2R3-S4-EVO,
* from 22.3 before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-S2-EVO,
* from 23.2 before 23.2R2-S1-EVO,
* from 23.4 before 23.4R2-EVO. |
| A Buffer Copy without Checking Size of Input vulnerability in the
Session Initialization Protocol (SIP) ALG of Juniper Networks Junos OS on MX Series and SRX Series allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS).
When memory utilization is high, and specific SIP packets are received, flowd/mspmand crashes. While the system recovers automatically, the disruption can significantly impact service stability. Continuous receipt of these specific SIP packets, while high utilization is present, will cause a sustained DoS condition. The utilization is outside the attackers control, so they would not be able to deterministically exploit this.
This issue affects Junos OS on SRX Series and MX Series:
* All versions before 22.4R3-S7,
* from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2. |
| A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution. |
| Buffer Overflow Vulnerability in libcdio 2.2.0 (fixed in 2.3.0) allows an attacker to execute arbitrary code via a crafted ISO 9660 image file. |
| Buffer Overflow in the ippprint (Internet Printing Protocol) service in Sagemcom F@st 3686 MAGYAR_4.121.0 allows remote attacker to execute arbitrary code by sending a crafted HTTP request. |
| A Buffer Copy without Checking Size of Input vulnerability in the PFE management daemon (evo-pfemand) of Juniper Networks Junos OS Evolved on ACX7000 Series allows an unauthenticated, adjacent attacker to cause a
Denial-of-Service (DoS).When multicast traffic with a specific, valid (S,G) is received, evo-pfemand crashes which leads to an outage of the affected FPC until it is manually recovered.
This issue affects Junos OS Evolved on ACX7000 Series:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.2-EVO versions before 22.2R3-S4-EVO,
* 22.3-EVO versions before 22.3R3-S3-EVO,
* 22.4-EVO versions before 22.4R3-S2-EVO,
* 23.2-EVO versions before 23.2R2-EVO,
* 23.4-EVO versions before 23.4R1-S2-EVO, 23.4R2-EVO. |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A vulnerability was discovered in the IPv6 fragmentation reassembly implementation of RIOT OS v2025.07. When copying the contents of the first fragment (offset=0) into the reassembly buffer, no size check is performed. It is possible to force the creation of a small reassembly buffer by first sending a shorter fragment (also with offset=0). Overflowing the reassembly buffer corrupts the state of other packet buffers which an attacker might be able to used to achieve further memory corruption (potentially resulting in remote code execution). To trigger the vulnerability, the `gnrc_ipv6_ext_frag` module must be included and the attacker must be able to send arbitrary IPv6 packets to the victim. Version 2025.10 fixes the issue. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. The BluFi example bundled in ESP-IDF was vulnerable to memory overflows in two areas: Wi-Fi credential handling and Diffie–Hellman key exchange. This vulnerability is fixed in 5.4.1, 5.3.3, 5.1.6, and 5.0.9. |
| Nsauditor 3.2.3 contains a denial of service vulnerability in the registration code input field that allows attackers to crash the application. Attackers can paste a large buffer of 256 repeated characters into the 'Key' field to trigger an application crash. |
| utility.c in telnetd in netkit telnet through 0.17 allows remote attackers to execute arbitrary code via short writes or urgent data, because of a buffer overflow involving the netclear and nextitem functions. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: use sysfs_emit() instead of sprintf()
sprintf() (still used in the MMC core for the sysfs output) is vulnerable
to the buffer overflow. Use the new-fangled sysfs_emit() instead.
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool. |
| A flaw was found in xfig. This vulnerability allows possible code execution via local input manipulation via bezier_spline function. |
