| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_page_mkwrite() to check folio->mapping is valid
Fix netfs_page_mkwrite() to check that folio->mapping is valid once it has
taken the folio lock (as filemap_page_mkwrite() does). Without this,
generic/247 occasionally oopses with something like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:trace_event_raw_event_netfs_folio+0x61/0xc0
...
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x6e/0xa0
? exc_page_fault+0xc2/0xe0
? asm_exc_page_fault+0x22/0x30
? trace_event_raw_event_netfs_folio+0x61/0xc0
trace_netfs_folio+0x39/0x40
netfs_page_mkwrite+0x14c/0x1d0
do_page_mkwrite+0x50/0x90
do_pte_missing+0x184/0x200
__handle_mm_fault+0x42d/0x500
handle_mm_fault+0x121/0x1f0
do_user_addr_fault+0x23e/0x3c0
exc_page_fault+0xc2/0xe0
asm_exc_page_fault+0x22/0x30
This is due to the invalidate_inode_pages2_range() issued at the end of the
DIO write interfering with the mmap'd writes. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix ufshcd_clear_cmd racing issue
When ufshcd_clear_cmd is racing with the completion ISR, the completed tag
of the request's mq_hctx pointer will be set to NULL by the ISR. And
ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE.
Return success when the request is completed by ISR because sq does not
need cleanup.
The racing flow is:
Thread A
ufshcd_err_handler step 1
ufshcd_try_to_abort_task
ufshcd_cmd_inflight(true) step 3
ufshcd_clear_cmd
...
ufshcd_mcq_req_to_hwq
blk_mq_unique_tag
rq->mq_hctx->queue_num step 5
Thread B
ufs_mtk_mcq_intr(cq complete ISR) step 2
scsi_done
...
__blk_mq_free_request
rq->mq_hctx = NULL; step 4
Below is KE back trace:
ufshcd_try_to_abort_task: cmd pending in the device. tag = 6
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194
pc : [0xffffffd589679bf8] blk_mq_unique_tag+0x8/0x14
lr : [0xffffffd5862f95b4] ufshcd_mcq_sq_cleanup+0x6c/0x1cc [ufs_mediatek_mod_ise]
Workqueue: ufs_eh_wq_0 ufshcd_err_handler [ufs_mediatek_mod_ise]
Call trace:
dump_backtrace+0xf8/0x148
show_stack+0x18/0x24
dump_stack_lvl+0x60/0x7c
dump_stack+0x18/0x3c
mrdump_common_die+0x24c/0x398 [mrdump]
ipanic_die+0x20/0x34 [mrdump]
notify_die+0x80/0xd8
die+0x94/0x2b8
__do_kernel_fault+0x264/0x298
do_page_fault+0xa4/0x4b8
do_translation_fault+0x38/0x54
do_mem_abort+0x58/0x118
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
blk_mq_unique_tag+0x8/0x14
ufshcd_clear_cmd+0x34/0x118 [ufs_mediatek_mod_ise]
ufshcd_try_to_abort_task+0x2c8/0x5b4 [ufs_mediatek_mod_ise]
ufshcd_err_handler+0xa7c/0xfa8 [ufs_mediatek_mod_ise]
process_one_work+0x208/0x4fc
worker_thread+0x228/0x438
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix ufshcd_abort_one racing issue
When ufshcd_abort_one is racing with the completion ISR, the completed tag
of the request's mq_hctx pointer will be set to NULL by ISR. Return
success when request is completed by ISR because ufshcd_abort_one does not
need to do anything.
The racing flow is:
Thread A
ufshcd_err_handler step 1
...
ufshcd_abort_one
ufshcd_try_to_abort_task
ufshcd_cmd_inflight(true) step 3
ufshcd_mcq_req_to_hwq
blk_mq_unique_tag
rq->mq_hctx->queue_num step 5
Thread B
ufs_mtk_mcq_intr(cq complete ISR) step 2
scsi_done
...
__blk_mq_free_request
rq->mq_hctx = NULL; step 4
Below is KE back trace.
ufshcd_try_to_abort_task: cmd at tag 41 not pending in the device.
ufshcd_try_to_abort_task: cmd at tag=41 is cleared.
Aborting tag 41 / CDB 0x28 succeeded
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194
pc : [0xffffffddd7a79bf8] blk_mq_unique_tag+0x8/0x14
lr : [0xffffffddd6155b84] ufshcd_mcq_req_to_hwq+0x1c/0x40 [ufs_mediatek_mod_ise]
do_mem_abort+0x58/0x118
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
blk_mq_unique_tag+0x8/0x14
ufshcd_err_handler+0xae4/0xfa8 [ufs_mediatek_mod_ise]
process_one_work+0x208/0x4fc
worker_thread+0x228/0x438
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: fix null deref on system suspend entry
When system enters suspend with an active stream, SOF core
calls hw_params_upon_resume(). On Intel platforms with HDA DMA used
to manage the link DMA, this leads to call chain of
hda_dsp_set_hw_params_upon_resume()
-> hda_dsp_dais_suspend()
-> hda_dai_suspend()
-> hda_ipc4_post_trigger()
A bug is hit in hda_dai_suspend() as hda_link_dma_cleanup() is run first,
which clears hext_stream->link_substream, and then hda_ipc4_post_trigger()
is called with a NULL snd_pcm_substream pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind()
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: allocate dummy checksums for zoned NODATASUM writes
Shin'ichiro reported that when he's running fstests' test-case
btrfs/167 on emulated zoned devices, he's seeing the following NULL
pointer dereference in 'btrfs_zone_finish_endio()':
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
RSP: 0018:ffff88867f107a90 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534
RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028
R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000
R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210
FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? die_addr+0x46/0x70
? exc_general_protection+0x14f/0x250
? asm_exc_general_protection+0x26/0x30
? do_raw_read_unlock+0x44/0x70
? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs]
? __pfx_lock_release+0x10/0x10
? do_raw_write_lock+0x90/0x260
? __pfx_do_raw_write_lock+0x10/0x10
? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs]
? _raw_write_unlock+0x23/0x40
? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs]
? lock_acquire+0x435/0x500
btrfs_work_helper+0x1b1/0xa70 [btrfs]
? __schedule+0x10a8/0x60b0
? __pfx___might_resched+0x10/0x10
process_one_work+0x862/0x1410
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? assign_work+0x16c/0x240
worker_thread+0x5e6/0x1010
? __pfx_worker_thread+0x10/0x10
kthread+0x2c3/0x3a0
? trace_irq_enable.constprop.0+0xce/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to
trigger:
assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815
This indicates, that we're missing the checksums list on the
ordered_extent. As btrfs/167 is doing a NOCOW write this is to be
expected.
Further analysis with drgn confirmed the assumption:
>>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode
>>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \
"vfs_inode")
>>> print(btrfs_inode.flags)
(u32)1
As zoned emulation mode simulates conventional zones on regular devices,
we cannot use zone-append for writing. But we're only attaching dummy
checksums if we're doing a zone-append write.
So for NOCOW zoned data writes on conventional zones, also attach a
dummy checksum. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty()
bdev->bd_super has been removed and commit 8887b94d9322 change the usage
from bdev->bd_super to b_assoc_map->host->i_sb. This introduces the
following NULL pointer dereference in ocfs2_journal_dirty() since
b_assoc_map is still not initialized. This can be easily reproduced by
running xfstests generic/186, which simulate no more credits.
[ 134.351592] BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 134.355341] RIP: 0010:ocfs2_journal_dirty+0x14f/0x160 [ocfs2]
...
[ 134.365071] Call Trace:
[ 134.365312] <TASK>
[ 134.365524] ? __die_body+0x1e/0x60
[ 134.365868] ? page_fault_oops+0x13d/0x4f0
[ 134.366265] ? __pfx_bit_wait_io+0x10/0x10
[ 134.366659] ? schedule+0x27/0xb0
[ 134.366981] ? exc_page_fault+0x6a/0x140
[ 134.367356] ? asm_exc_page_fault+0x26/0x30
[ 134.367762] ? ocfs2_journal_dirty+0x14f/0x160 [ocfs2]
[ 134.368305] ? ocfs2_journal_dirty+0x13d/0x160 [ocfs2]
[ 134.368837] ocfs2_create_new_meta_bhs.isra.51+0x139/0x2e0 [ocfs2]
[ 134.369454] ocfs2_grow_tree+0x688/0x8a0 [ocfs2]
[ 134.369927] ocfs2_split_and_insert.isra.67+0x35c/0x4a0 [ocfs2]
[ 134.370521] ocfs2_split_extent+0x314/0x4d0 [ocfs2]
[ 134.371019] ocfs2_change_extent_flag+0x174/0x410 [ocfs2]
[ 134.371566] ocfs2_add_refcount_flag+0x3fa/0x630 [ocfs2]
[ 134.372117] ocfs2_reflink_remap_extent+0x21b/0x4c0 [ocfs2]
[ 134.372994] ? inode_update_timestamps+0x4a/0x120
[ 134.373692] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2]
[ 134.374545] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2]
[ 134.375393] ocfs2_reflink_remap_blocks+0xe4/0x4e0 [ocfs2]
[ 134.376197] ocfs2_remap_file_range+0x1de/0x390 [ocfs2]
[ 134.376971] ? security_file_permission+0x29/0x50
[ 134.377644] vfs_clone_file_range+0xfe/0x320
[ 134.378268] ioctl_file_clone+0x45/0xa0
[ 134.378853] do_vfs_ioctl+0x457/0x990
[ 134.379422] __x64_sys_ioctl+0x6e/0xd0
[ 134.379987] do_syscall_64+0x5d/0x170
[ 134.380550] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 134.381231] RIP: 0033:0x7fa4926397cb
[ 134.381786] Code: 73 01 c3 48 8b 0d bd 56 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8d 56 38 00 f7 d8 64 89 01 48
[ 134.383930] RSP: 002b:00007ffc2b39f7b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 134.384854] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fa4926397cb
[ 134.385734] RDX: 00007ffc2b39f7f0 RSI: 000000004020940d RDI: 0000000000000003
[ 134.386606] RBP: 0000000000000000 R08: 00111a82a4f015bb R09: 00007fa494221000
[ 134.387476] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 134.388342] R13: 0000000000f10000 R14: 0000558e844e2ac8 R15: 0000000000f10000
[ 134.389207] </TASK>
Fix it by only aborting transaction and journal in ocfs2_journal_dirty()
now, and leave ocfs2_abort() later when detecting an aborted handle,
e.g. start next transaction. Also log the handle details in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger()
bdev->bd_super has been removed and commit 8887b94d9322 change the usage
from bdev->bd_super to b_assoc_map->host->i_sb. Since ocfs2 hasn't set
bh->b_assoc_map, it will trigger NULL pointer dereference when calling
into ocfs2_abort_trigger().
Actually this was pointed out in history, see commit 74e364ad1b13. But
I've made a mistake when reviewing commit 8887b94d9322 and then
re-introduce this regression.
Since we cannot revive bdev in buffer head, so fix this issue by
initializing all types of ocfs2 triggers when fill super, and then get the
specific ocfs2 trigger from ocfs2_caching_info when access journal.
[joseph.qi@linux.alibaba.com: v2] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: validate mandatory meta and payload
Check for mandatory netlink attributes in payload and meta expression
when used embedded from the inner expression, otherwise NULL pointer
dereference is possible from userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
(cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/qcom/lmh: Check for SCM availability at probe
Up until now, the necessary scm availability check has not been
performed, leading to possible null pointer dereferences (which did
happen for me on RB1).
Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l: async: Fix notifier list entry init
struct v4l2_async_notifier has several list_head members, but only
waiting_list and done_list are initialized. notifier_entry was kept
'zeroed' leading to an uninitialized list_head.
This results in a NULL-pointer dereference if csi2_async_register() fails,
e.g. node for remote endpoint is disabled, and returns -ENOTCONN.
The following calls to v4l2_async_nf_unregister() results in a NULL
pointer dereference.
Add the missing list head initializer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Check 'folio' pointer for NULL
It can be NULL if bmap is called. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: connac: check for null before dereferencing
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix netif state handling
mlx5e_suspend cleans resources only if netif_device_present() returns
true. However, mlx5e_resume changes the state of netif, via
mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED.
In the below case, the above leads to NULL-ptr Oops[1] and memory
leaks:
mlx5e_probe
_mlx5e_resume
mlx5e_attach_netdev
mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach()
register_netdev <-- failed for some reason.
ERROR_FLOW:
_mlx5e_suspend <-- netif_device_present return false, resources aren't freed :(
Hence, clean resources in this case as well.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP
CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at0xffffffffffffffd6.
RSP: 0018:ffff888178aaf758 EFLAGS: 00010246
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x14c/0x3c0
? exc_page_fault+0x75/0x140
? asm_exc_page_fault+0x22/0x30
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core]
mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib]
mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib]
__mlx5_ib_add+0x34/0xd0 [mlx5_ib]
mlx5r_probe+0xe1/0x210 [mlx5_ib]
? auxiliary_match_id+0x6a/0x90
auxiliary_bus_probe+0x38/0x80
? driver_sysfs_add+0x51/0x80
really_probe+0xc9/0x3e0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x637/0x840
__auxiliary_device_add+0x3b/0xa0
add_adev+0xc9/0x140 [mlx5_core]
mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core]
mlx5_register_device+0x53/0xa0 [mlx5_core]
mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core]
mlx5_init_one+0x3b/0x60 [mlx5_core]
probe_one+0x44c/0x730 [mlx5_core]
local_pci_probe+0x3e/0x90
pci_device_probe+0xbf/0x210
? kernfs_create_link+0x5d/0xa0
? sysfs_do_create_link_sd+0x60/0xc0
really_probe+0xc9/0x3e0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
pci_bus_add_device+0x54/0x80
pci_iov_add_virtfn+0x2e6/0x320
sriov_enable+0x208/0x420
mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core]
sriov_numvfs_store+0xae/0x1a0
kernfs_fop_write_iter+0x10c/0x1a0
vfs_write+0x291/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
CR2: 0000000000000000
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix NULL module pointer assignment at card init
The commit 81033c6b584b ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.
For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.
Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
In the prueth_probe() function, if one of the calls to emac_phy_connect()
fails due to of_phy_connect() returning NULL, then the subsequent call to
phy_attached_info() will dereference a NULL pointer.
Check the return code of emac_phy_connect and fail cleanly if there is an
error. |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Prevent null-pointer dereference when prog to load has no BTF
In bpf_objec_load_prog(), there's no guarantee that obj->btf is non-NULL
when passing it to btf__fd(), and this function does not perform any
check before dereferencing its argument (as bpf_object__btf_fd() used to
do). As a consequence, we get segmentation fault errors in bpftool (for
example) when trying to load programs that come without BTF information.
v2: Keep btf__fd() in the fix instead of reverting to bpf_object__btf_fd(). |
| In the Linux kernel, the following vulnerability has been resolved:
cppc_cpufreq: Fix possible null pointer dereference
cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from
different places with various parameters. So cpufreq_cpu_get() can return
null as 'policy' in some circumstances.
Fix this bug by adding null return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
